The choice of the substrate is mainly determined by the application domain including polyimide, Si and SiO2. The effect of substrate on the deposition lines was studied by setting laser source at 532 nm. As compared to other substrates, SiO2 showed better performance of deposition continuity. Better deposition was obtained with less energy consumption, by changing laser source from 1064 to 532 nm. Combining the etching and the laser-guided writing through At. ferrooxidans 13820 culture supernatant provides an innovative and cleaner

way of producing metallic microstructures. (C) 2012 Elsevier B.V. All rights reserved.”
“The effect of various casting parameters and thermophysical properties of bulk metallic glasses (BMGs) on critical section AZD6738 cell line size, defined as the maximum casting size that generates a through-section amorphous alloy, has been analyzed using a simple heat-transfer model. It was found that the interfacial heat transfer Lapatinib between the mold and the casting has a strong influence on the critical section thickness of a BMG. It is argued herein that the critical cooling rate rather than the critical casting size is a more robust indicator of glass-forming ability (GFA). Further, with respect to the critical cooling rate and heat-transfer effects during casting, a distinct difference was found

between the critical casting thickness in rectangular-shaped castings and the critical casting diameter in rod-shaped castings, and a relationship was derived for relating these parameters.”
“This paper proposes a new variable regularized least-squares (VR-LS) algorithm by recursively constructing a weighting scalar of the regularized least-squares (LS) cost function. Since the recursive LS (RLS) algorithm provides the best performances by all of VR-LS algorithms, the design objective of the weighting scalar is chosen such that equivalent optimality is ensured between one-step-ahead cost functions of the RLS and of the VR-LS algorithm. The proposed

VR-LS algorithm functions similarly as the RLS with uncorrelated inputs; however, this is not the case with colored (correlated) inputs. Therefore, a conventional filtering technique is applied to both on the inputs and on the desired Tubastatin A Epigenetics inhibitor signals so as to obtain whitened inputs. This enables the proposed algorithm handle the case of correlated inputs. (C) 2010 Elsevier B.V. All rights reserved.”
“Replacement of the patellofemoral and medial tibiofemoral joints has been performed since the 1980s. Bicompartmental replacement was modified. Two different designs were developed: one custom implant and one with multiple predetermined sizes. The surgical technique and instruments are unique and training is helpful. There are no clinical reports for the custom design as of yet. The standard implant has several reports in the literature with only fair to good results and has subsequently been withdrawn from the market.